Honeywell

The Honeywell FF 06 mechanical fine filter consists of: a body made of stamped brass; brass fittings with an external thread; a fine filter element made of stainless steel  The filter bowl is made of impact-resistant transparent synthetic material or stamped brass that is resistant to zinc flushing Filtered impurities accumulate in the lower part of the device, filling control is performed visually, for flushing it is necessary to open the shut-off drain tap and the filter will be cleared of contamination by natural current Continuous water supply is also provided during the washing process

Fine filter Honeywell FF 06 complete set:

Housing with internal and external threads,

Threaded fittings from 1/2 " - 1",

Fine filter in transparent or brass filter bowl,

Ball valve

Technical data of the filter Honeywell FF 06:

Mounting position: Installed in a horizontal pipeline with the bowl facing down

Working pressure: Maximum 16 bar for cold water, maximum 25 bar for hot water

Operating temperature: Maximum 40 S for filters with transparent bowl, maximum 80 S for filters with brass bowl

Working environment: water

Honeywell fk06 filter

jpg" alt="" width="126" height="199" />

Honeywell fk06-AA filters are a combination of a flush filter with a pressure reducing valve for continuous filtered water supply They prevent the penetration of foreign bodies, such as rust particles, hemp fibers or grains of sand Foreign particles collected inside the filter flask can be easily removed by flushing The pressure reducing valve prevents overpressure protection and reduces water consumption Each of the listed elements individually meets the requirements of the current DIN/DVGW standards The features and characteristics of individual elements also apply to all combined devices The small size allows you to install the combined filter in places with limited space

Technical characteristics of Honeywell FK06-AA/AAM

With external threaded connections, transparent filter bowl and filter cell size of 100 MK

With external threaded connections, a filter bowl made of de-galvanizing brass and a filter cell size of 100 MK

Фильтр Honeywell F76S-AA

jpg" alt="" width="128" height="281" />

Honeywell F76S-AA backwash fine filters ensure a continuous supply of filtered water Fine filters prevent the penetration of foreign bodies such as rust particles, hemp fibers or grains of sand The products meet the requirements of the current DIN/DVGW specifications Honeywell F76S filters can be equipped with a fully automatic backwash drive Z11AS and a differential pressure switch DDS76

Principle of operation of the backwash filter Honeywell F 76s:

This filter uses the method of backwash of the mesh, which provides a more thorough cleaning The water filtration process is not interrupted, which is important for the continuous supply of purified water to homes, cottages, and large consumers The filter is flushed by simply turning the valve, either manually or using an automatic drainage device at specified times

With external threaded connections, transparent filter bowl and filter cell size of 100 MK

With external threaded connections, transparent filter bowl and filter cell size of 20 MK

With external threaded connections, transparent filter bowl and filter cell size of 50 MK

With external threaded connections, transparent filter bowl and filter cell size 200 MK

With external threaded connections, red bronze filter bowl and 100 MK filter cell size

With external threaded connections, red bronze filter bowl and 50 MK filter cell size

Фильтр Honeywell HS10S-AAM