+7 (495) 989 11 40
0
/ / Candan and G-Beka welding equipment
Candan and G-Beka welding equipment

Candan and G-Beka welding equipment

is one of the most important elements in the installation of plastic piping systems To ensure high-quality and long-lasting welded joints, TD Stroyservice delivered products from the largest Turkish factories to its warehouses:

Candan Makina factory, founded in 1997 in g Istanbul Turkey, is the leader In the Russian market of equipment for polypropylene Many installers are familiar with turquoise suitcases with the inscription CANDAN Now the factory produces the following range:

CANDAN SM-01 welding machine (flagship model)

 jpg" alt="" width="256" height="256" />

  • The most popular model in the line of the plant, a convenient and reliable device that allows you to solve the problem of installing pipes for heating and water supply systems with diameters from 20 to 63 mm Two separate heating shades with switches and light indication allow you to use the device at full power of 1500 W, and in the range of 850 and 650 W Three pastoznyh the socket Temperature controller in the range from 50 to 320 °C

Technical parameters:

  • Diameters of welded tubes: 20 - 63 mm;
  • Power: 1500W (dual element 650+850 W)
  • Voltage: 220-240 V;
  • Frequency: 50-60 Hz;
  • Operating temperature: 270 °C;
  • Cable: 3X1, 5 mm2;2mt fire-resistant, withstands heating up to 300 °C;
  • Heater made of stainless material with the possibility of simultaneous installation of three heating nozzles at once;
  • Thermostat adjustment indicator: 50-320 °C;
  • Power cable: 3x2. 5 mm cross section;
  • Protection level: IP 44
  • Fuse: 16A
  • Weight: 6.5 kg;
  • Article: CM-01 (GOLD)

Guration:

  • Teflon-coated nozzles for welding PP pipes with a diameter of 20, 25, 32, 40 mm;
  • scissors for cutting polypropylene pipes with a diameter of 16-42 mm;
  • stand for welding machine for polypropylene pipes with the ability to attach to the edge of the table for easy installation and installation of polypropylene pipes;
  • level, for determining the horizontal slope of the pipeline to be welded;
  • keys for fixing welding attachments;
  • tape measure 2 or 4 meters long;
  • instructions for welding polypropylene pipes and warranty card

The soldering iron for plastic pipes CANDAN CM-01 is certified, the warranty period is 1 year

Polypropylene welding machine CANDAN CM-03 (budget model)

 jpg" alt="" width="250" height="213" />

Compact model The welding machine of this model is most common in retail stores Designed for installation teams and individuals Allows to mount pipeline systems for water supply and heating with diameters from 20 to 63 mm It has two separate heating circuits, power 750 W each, with light indication on buttons and bulbs Two pastoznyh the socket Temperature controller in the range from 50 to 320 o C

Technical parameters:

  • Diameter of welded pipes: 16-75 mm;
  • Power: 1500W (dual element 750+750W);
  • Voltage: 220-240 V;
  • Frequency 50-60 Hz;
  • Operating temperature: 270 °C;
  • Heater made of stainless material with the possibility of simultaneous installation of two heating nozzles at once;
  • Adjustment indicator of thermostat: 50-320 °C;
  • Power cable: 3x2, 5mm;
  • Protection level: IP 44;
  • Fuse: 16A;
  • Weight: 6.0 kg;
  • Article: CM-03 (EXTRA)

Guration:

  • nozzles for welding machine with Teflon coating with a diameter of 20, 25, 32, 40 mm;
  • shears for cutting pipes with a diameter of 16-42 mm;
  • cross-shaped stand for installing the welding machine during welding operations;
  • level, for determining the horizontal slope of the pipeline to be welded;
  • keys for fixing welding attachments;
  • tape measure 2 or 4 meters long;
  • instructions for welding polypropylene pipes and warranty card;
  • metal box for transporting the welding machine

The soldering iron for plastic pipes CANDAN CM-03 is certified, the warranty period is 1 year

CANDAN SM-04 welding machine (for large diameters)

 jpg" alt="" width="280" height="251" />

This unit is designed for installation of heating and water supply systems made of polypropylene with large diameters from 50 to 110 mm  The design includes two separate heating circuits of 1000 W each, the total power of the device is 2000 W There is a light indication on the buttons and bulbs One landing socket for the nozzle Temperature adjustment range from 20 to 320 o C

Technical parameters:

  • The diameter of the welded pipe: 16 - 110mm;
  • Power: 2000W (double heating element 1000+1000W);
  • Voltage: 220-240 V;
  • Frequency 50-60 Hz;
  • Operating temperature: 270 °C;
  • Stainless steel heater with non-stick coating on top;
  • Adjustment indicator of thermostat: 50-320 °C;
  • Power cable: 3x2, 5mm;
  • Protection level: IP 44;
  • Fuse: 16A;
  • Weight: 7.7 kg;
  • Article: CM-04 (BIG)

Equipment:

  • nozzles for welding machine with Teflon coating with a diameter of 50, 63, 75 mm;
  • stand for installing the welding machine during welding operations with the possibility of fixing to the edge of the table;
  • keys for fixing welding attachments;
  • instructions for welding polypropylene pipes and warranty card;
  • metal box for transporting the welding machine

The soldering iron for plastic pipes CANDAN CM-04 is certified, the warranty period is 1 year

 

CANDAN CM-05 welding machine (for large diameters)

 jpg" alt="" width="271" height="244" />

This unit is designed for installation of heating and water supply systems made of polypropylene with large diameters from 90 to 160 mm  The design includes two separate heating circuits of 1200 W each, the total power of the device is 2400 W There is a light indication on the buttons and bulbs One landing socket for the nozzle Temperature adjustment range from 50 to 320 C

Technical parameters:

  • Diameters of welded pipes: 50-160mm;
  • Power: 2400W (dual heating element 1200 + 1200W);
  • Voltage: 220-240 V;
  • Frequency: 50-60 Hz;
  • Operating temperature: 270oc;
  • Cable: 3X1, 5 mm2;2mt fire-resistant, withstands heating up to 300 ° C;
  • Heater: Teflon-coated stainless steel;
  • Thermostat adjustment indicator: 50-320oc;
  • Power cable: 3x2. 5 mm cross section;
  • Protection level: IP 44
  • Fuse: 16A
  • Weight: 5 kg;
  • Article: CM-05 (BIGGEST)

Guration:

  • metal suitcase;
  • stand-tripod for welding machine for polypropylene pipes for easy installation and installation of polypropylene pipes;
  • keys for fixing welding attachments;
  • instructions for welding polypropylene pipes in Russian and warranty card;

Welding machine for large diameter pipes CANDAN CM-05 is certified, warranty period is 1 year

 

 

Сварочный аппарат CANDAN СМ-06 (супер эконом)

 

Compact model, the welding machine of this model is most common in retail stores Designed for installation teams and individuals Allows to mount pipeline systems for water supply and heating with diameters from 20 to 50 mm It has two separate heating circuits, power 750 W each, with light indication on buttons and bulbs Two landing slots for attachments Temperature controller in the range from 50 to 320 C

Technical parameters:

  • The diameter of the welded pipe: 16 - 50mm;
  • Power: 1500W (dual element 750+750W);
  • Voltage: 220-240 V;
  • Frequency 50-60 Hz;
  • Operating temperature: 270oc;
  • Heater made of stainless material with the possibility of simultaneous installation of two heating nozzles at once;
  • Thermostat adjustment indicator: 50-320oc;
  • Power cable: 3x2, 5mm, length 160 cm;
  • Protection level: IP 44;
  • Fuse: 16A;
  • Weight: 5.0 kg;
  • Article: CM-06

Guration:

  • nozzles for welding machine with Teflon coating with a diameter of 20, 25, 32, 40 mm;
  • shears for cutting pipes with a diameter of 16-42 mm;
  • cross-shaped stand for installing the welding machine during welding operations;
  • level, for determining the horizontal slope of the pipeline to be welded;
  • keys for fixing welding attachments;
  • tape measure 2 or 4 meters long;
  • metal box for transporting a blue welding machine

The soldering iron for plastic pipes CANDAN CM-06 is certified, the warranty period is 1 year

CANDAN CM-60 hydraulic test pump

 jpg" alt="" width="262" height="280" />

The pump is designed for hydraulic testing of pipeline systems made of polypropylene, metal plastic, steel, copper, PVC, PE-RT and PEX materials It can pump air, water, and oil into the system It has an internal volume of 12 liters Able to create a pressure of 60 ATM Connection size 1/2”

Technical parameters:

  • The maximum pressure is 60 atmospheres;
  • Operating temperature - from 50 to 120oC;
  • The drive is manual;
  • The size of the pump housing is 190x530x305 mm;
  • Tank capacity-12 l;
  • The size of the outlet fitting on the hose is 1/2" (inch);
  • The volume of the piston is 45 ml;
  • Weight: 8 kg;
  • Article: CM-60 (TEST POMPASI);

Scissors for cutting of pipes

 jpg" alt="" width="829" height="174" />

In the range of CANDAN company, there are two types of scissors for pipes with a diameter from 16 to 40 mm and from 40 to 63 mm

 

CANDAN nozzles for welding machines

 

They offer a wide range of pipes from 16 to 160 mm High quality Teflon coating Additional protection of the nozzle with thermal film

Table with time of heating and cooling of polypropylene pipes:

 jpg" alt="" width="903" height="488" />

Stripping for polypropylene pipes

jpg" alt="" width="585" height="236" />   

Manual Stripping for the outer layer of aluminum foil:

Double-sided 16*20; 20*25; 32*40; 50*63 mm

Single-sided 75; 90; 110 mm

Strippers for the middle layer, end face: 20*25; 32*40; 50*63 mm

Stripping for the outer layer, in the form of a hammer head:

16; 20; 25; 32; 40; 50; 63; 75; 90; 110 mm

G-BEKA factory, a production concern founded in 2010, Istanbul Turkey Production specializes in production of: welding equipment for systems of polypropylene pipelines, flexible water and gas supply, flexible air ducts and flues The range of TD Stroyservice company since 2012 includes the following models:

Welding machine G-BEKA WM-10

jpg" alt="" width="324" height="243" />

Convenient and compact device, with a good configuration, excellent price-quality ratio

Power 900 W

Delivery set:

  • Welding machine,
  • metal box,
  • welding nozzles dimensions (20,25,32,40,50,63 mm),
  • bolts for attachment of attachments,
  • stand for welding machine,
  • key (hexagon)
  • Instructions for use
  • Warranty card

 

 

 

 

Welding machine G BEKA WM-02-26

Convenient and compact device, for installation in a limited space, with the main set of attachments Excellent value for money

 

Power 900 W

Delivery set:

  • Welding machine,
  • metal box,
  • scissors for PP pipes small,
  • welding nozzles dimensions (20,25,32,40 mm),
  • bolts for attachment of attachments,
  • stand for welding machine,
  • key (hexagon)
  • Instructions for use
  • Warranty card

Welding machine G BEKA Electron

Power 900 W

Delivery set:

  • Welding machine,
  • metal box,
  • scissors for PP pipes small,
  • welding nozzles dimensions (20,25,32,40,50,63 mm),
  • bolts for attachment of attachments,
  • roulette,
  • screwdriver,
  • level,
  • gloves,
  • mounting bracket
  • stand for welding machine,
  • key (hexagon)
  • Instructions for use
  • Warranty card

 

Welding machine G BEKA WM-24

Professional device of full configuration, three nozzle sockets, two heating circuits of 800 W With color display

Power 1600 W

Delivery set:

  • Welding machine,
  • metal box
  • large polypropylene pipe shears,
  • welding nozzles dimensions (20,25,32,40,50,63 mm),
  • bolts for attachment of attachments,
  • screwdriver,
  • level,
  • gloves,
  • stand for welding machine,
  • key (hexagon)
  • Instructions for use
  • Warranty card

Welding machine G BEKA WM-02

Professional device of full configuration, three landing sockets for nozzles, two heating circuits of 800 W With color display

Power 1600 W

Delivery set:

  • Welding machine,
  • metal box,
  • scissors for PP pipes small,
  • welding nozzles dimensions (20,25,32,40,50,63 mm),
  • bolts for attachment of attachments,
  • roulette,
  • screwdriver,
  • level,
  • gloves,
  • stand for welding machine,
  • key (hexagon)
  • Instructions for use
  • Warranty card

G-BEKA pipe cutting shears

Shears for plastic pipes BEKA (20-63)

Designed for cutting plastic pipes from 20 to 63 mm

 

Shears for plastic pipes BEKA (16-42)

Designed for cutting plastic pipes from 16 to 40 mm

 

Опрессовочный насос BEKA RP 50

 

The pump is designed for hydraulic testing of pipeline systems made of polypropylene, metal plastic, steel, copper, PVC, PE-RT and PEX materials It can pump air, water, and oil into the system It has an internal volume of 12 liters Able to create a pressure of 60 ATM Connection size 1/2”

  • Maximum pressure-60 ATM;
  • Operating temperature - from 50 to 120oC;
  • The drive is manual;
  • The size of the pump housing is 190x530x305 mm;
  • Tank capacity-12 l;
  • The size of the outlet fitting on the hose is 1/2" (inch);
  • The volume of the piston is 45 ml;
  • Weight: 8 kg;

to_top