New products in the range of polypropylene pipes and fittings TEBO

The domestic plant TEBO technics from 23.03.2018 started mass production of polypropylene pipes reinforced with glass fiber SDR 7.4 and SDR 6 125 and 160 diameter. These products will help solve the problems of hot water supply and heating in multi-storey construction, without resorting to the use of metal pipes. High quality, fast and convenient installation, products are manufactured in accordance with GOST 32415-2013.

For radiator heating systems, the TEBO technics range includes polypropylene thermostatics. The feed line has a direct and angular size range of 20*1/2 and 25*3/4 for manual adjustment, as well as a direct and angular size range of 20*1/2 and 25*3/4 with the possibility of installing a thermal head. For the return line, the shut-off valve is a straight and angular size range of 20*1/2 and 25*3/4. It is possible to supply sets of manual valve + valve and automatic valve + valve, in straight and angular versions, size range 20 * 1/2 and 25*3/4.

American polypropylene from the TEBO technics range is an economical and reliable solution for water supply systems. In engineering systems of water supply, at the device of detachable connections and installation of the serviced equipment high strength and temperature indicators of brass are not always required. Budget and convenient, not subject to souring, threaded connections made of polypropylene, in the range of sizes 20*1/2, 25*3/4 and 32*1

For the hydrodynamic balancing of heating and hot water systems, the TEBO technics range includes polypropylene hydrostretches.

This device is intended for use in low-rise construction and private home ownership, in radiator heating systems, water warm floors and water warm walls. The device protects the equipment from drying and foreign suspensions in the heat carrier, allows stable operation of boiler and pumping equipment, extends the service life of shut-off, regulating and measuring valves.

Technical parameters:

~ Maximum power: 25 kW.

~ Incoming hot coolant temperature: 75 °C.

~ Maximum working pressure: 10 bar.

~ Maximum flow rate: 9 cubic meters / hour.

~ Number of secondary circuits to be connected, depending on the design, from 1 to 3 circuits.

The following options are available for ordering: 75*25 hydro-heater with one, two or three circuits.