Office adress
Click on the map to enlarge
Warehouse address
Click on the map to enlarge
Metal pipe clamp included 105-115 (4") (M10)
Available
Packaging: the package/box
Box: 50
Weight: 0.204
Material: galvanized steel, EPDM
Application: fixing pipes to horizontal and vertical surfaces
A country: Russia
Normative document: GOST 24140-80
Dowel: M12x60
Type of galvanizing: cold galvanizing
Box weight, kg: 8.05
Brand: SVK (SVK)
Plate width, mm: 20
The size of the screws: M5x20
Stud: M10x100
Box size, mm: 380x280x170
Size, inches: 4"
Steel grade: Coil strip GOST 503-81
Product type: plumbing clamp
Girth, mm: 108-114
Plate thickness, mm: 1.2
The size of the nuts: M10
Description
< strong>metal Clamp included 105-115 (4") SVK (SVK)
Plumbing clamp. It is used for fixing pipes to horizontal and vertical surfaces. The product complies with GOST 24140-80.< / p> < p>Girth: 105-115 mm, size: 4 " inches.
Materials:
-
< li>strip made of high-quality carbon structural steel grade 08ps (corresponds to GOST 503-81). Plate thickness is 1.2 mm, width is 20 mm.< / li>
< li>elastic insert made of EPDM rubber seal.< / li>
the Material is protected from corrosion and has a light shade due to the chromated zinc coating (thickness 6-8 microns, cold galvanizing method).
Guration:
The package includes a dowel M12*60mm and a stud M10*100mm. At the request of the customer, the product can be delivered without a set or complete with a different size hairpin. The clamp with a stud and dowel is placed in an individual package. It is possible to deliver ICS products in packages with the customer's design and barcode.
Installation recommendations< / p> < p>the Clamp is selected according to the pipe diameter (105-115 mm). Installation of a metal clamp with a nut (M10) complete with a stud and dowel 105-115 (4") SVK (SVK) is made on the ceiling or wall. It is important to follow the sequence of actions:
-
< li>make markings for holes, install dowels in the holes.
- Insert a stud into the dowel to match the size of the M10 nut.< / li>
- Screw half of the clamp and nut onto it and tighten it securely.
- Put the pipe in the fasteners, put the second half of the clamp on. Perform screed with a screwdriver with a slotted or cross attachment. The angle of rotation of the clamp is adjusted with a wrench.
Customers also bought with this product
